MODELS OF PLATE HEAT EXCHANGERS
504 PLATE HEAT EXCHANGERS;
MIT data for 504 models

Standard Desing: The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids betweenwhich heat transfer will take place. The plate pack is assembledbetweeen a fix frame plate and a movable pressure plate and compressed by tightening bolts.Theplates are fitted with a gasket which seals the interplate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The plate and the pressure plate are suspended from anupper carrying bar and located by a lower guiding bar, both of which are fixed to a support column.Connections are located in the frame plate or, if either or both fluids make more than a single..
Working Principle: Channels are formed between the plates and the corner ports are arranged so that the two media fl ow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current fl ow is created for highest possible efficiency.
The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.
Frame Types :
• Painted Frame with Carbon Steel Connection
• Painted Frame with Stainless Steel Connection
• Stainless Steel Frame with hygenic connection
• Stainless Steel Frame with threaded connection

Gasket Material
• NBR Clipped
• EPDM Clipped
• Slicon Clipped
• Viton Clipped

Plate Types :
• Flow Plate
• End Plate

Plate Thickness :
• 0,5 mm• 0,6 mm
 

Plate Material :
• AISI 316
• Titanium
• CTX

Temperature Limits
NBR Gaskets: Max : 115
CEPDM Gaskets Max : 150
CSLICON Gaskets Max : 200
CVITON Gaslets Max : 225 C

Plate Specification:
Length : 453 mm
Width : 144 mm
Weight: 0,26 kg ( AISI 316)
Angle : 30 Degree
Flow Type : Parallel
Gasket Type : Clipped
Connection : 32 mm
Gap : 2,3 mm
Max Flow Capacity : 14 m^3/h
Nom Comp. Pitch :2,85 mm
Plate Removal Distance: 120 mm

Frame Specifition :
Lenght : 480 mm
Width: 200 mm
Weight: 32 kg

Website Design
Web design and programming Programming and Software