| MIT data for 514 models
| Standard Desing:
The plate heat
exchanger consists of a pack of corrugated metal plates with
portholes for the passage of the two fluids betweenwhich heat
transfer will take place. The plate pack is assembledbetweeen a
fix frame plate and a movable pressure plate and compressed by
tightening bolts.Theplates are fitted with a gasket which seals
the interplate channel and directs the fluids into alternate
channels. The number of plates is determined by the flow rate,
physical properties of the fluids, pressure drop and temperature
program. The plate corrugations promote fluid turbulence and
support the plates against differential pressure. The plate and
the pressure plate are suspended from anupper carrying bar and
located by a lower guiding bar, both of which are fixed to a
support column.Connections are located in the frame plate or, if
either or both fluids make more than a single.. |
Working Principle:
Channels are formed
between the plates and the corner ports are arranged so that the
two media fl ow through alternate channels. The heat is
transferred through the plate between the channels, and complete
counter-current fl ow is created for highest possible efficiency.
The corrugation of the plates provides the passage between the
plates, supports each plate against the adjacent one and
enhances the turbulence, resulting in efficient heat transfer. |
Frame Types
:
• Painted Frame with Carbon Steel Connection
• Painted Frame with Stainless Steel Connection
• Stainless Steel Frame with hygenic connection
• Stainless Steel Frame with threaded connection
Gasket
Material
• NBR Clipped
• EPDM Clipped
• Slicon Clipped
• Viton Clipped |
Plate Types
:
• Flow Plate
• End Plate
Plate
Thickness :
• 0,5 mm• 0,6 mm
|
Plate
Material :
• AISI 316
• Titanium
• CTX
Temperature Limits
NBR Gaskets: Max : 115
CEPDM Gaskets Max : 150
CSLICON Gaskets Max : 200
CVITON Gaslets Max : 225 C |
|
Plate
Specification:
Length : 748 mm
Width : 246 mm
Weight: 0,85 kg ( AISI 316)
Angle : 45 Degree
Flow Type : Parallel
Gasket Type : Clipped
Connection : 53 mm
Gap : 2,45 mm
Max Flow Capacity : 65 m^3/h
Nom Comp. Pitch :2,85 mm
Plate Removal Distance: 200 mm
Frame Specifition :
Lenght : 935 mm
Width: 350 mm
Weight: 110 kg |
