|
PLAKALI EŞANJÖR MODELLERİ |
|
522 PLAKALI
EŞANJÖR; |
|
MIT 522 model dataları |
|
 |
| |
|
Standard Desing:
The plate heat exchanger consists of a
pack of corrugated metal plates with
portholes for the passage of the two
fluids betweenwhich heat transfer will
take place. The plate pack is
assembledbetweeen a fix frame plate and
a movable pressure plate and compressed
by tightening bolts.Theplates are fitted
with a gasket which seals the interplate
channel and directs the fluids into
alternate channels. The number of plates
is determined by the flow rate, physical
properties of the fluids, pressure drop
and temperature program. The plate
corrugations promote fluid turbulence
and support the plates against
differential pressure. The plate and the
pressure plate are suspended from
anupper carrying bar and located by a
lower guiding bar, both of which are
fixed to a support column.Connections
are located in the frame plate or, if
either or both fluids make more than a
single.. |
Working Principle:
Channels are formed between the plates
and the corner ports are arranged so
that the two media fl ow through
alternate channels. The heat is
transferred through the plate between
the channels, and complete counter-current
fl ow is created for highest possible
efficiency.
The corrugation of the plates provides
the passage between the plates, supports
each plate against the adjacent one and
enhances the turbulence, resulting in
efficient heat transfer. |
Frame Types :
• Painted Frame with Carbon
Steel Connection
• Painted Frame with Stainless
Steel Connection
• Stainless Steel Frame with
hygenic connection
• Stainless Steel Frame with
threaded connection
Gasket Material
• NBR Clipped
• EPDM Clipped
• Slicon Clipped
• Viton Clipped |
Plate Types :
• Flow Plate
• End Plate
Plate Thickness :
• 0,5 mm• 0,6 mm
|
Plate Material :
• AISI 316
• Titanium
• CTX
Temperature Limits
NBR Gaskets: Max : 115
CEPDM Gaskets Max : 150
CSLICON Gaskets Max : 200
CVITON Gaslets Max : 225 C
|
|
Plate Specification:
Length : 882 mm
Width : 378 mm
Weight: 1,40 kg ( AISI 316)
Angle : 30-60 Degree
Flow Type : Parallel
Gasket Type : Clipped
Connection : 100 mm
Gap : 3,45 mm
Max Flow Capacity : 170 m^3/h
Nom Comp. Pitch : 3,9 mm
Plate Removal Distance: 300 mm
Frame Specifition :
Lenght : 1088 mm
Width: 470 mm
Weight: 220 kg |
